Thank you to Samual Yanz (N7FNV) for submitting a guide that he's created about tracking and decoding NOAA weather satellites. The guide can be downloaded from this link as a PDF.
Currently there are three operational polar orbiting NOAA weather satellites that transmit image data in the APT format at 137 MHz. When one of these satellites pass overhead, it is possible to use an RTL-SDR with appropriate satellite antenna and software to receive the satellite weather images they transmit.
Samual's guide focuses on the software and shows how to setup Virtual Audio Cable for piping audio between programs, SDR# for receiving the signal, Orbitron for tracking the satellite and WXtoIMG for decoding the image.
Thank you to Joel Moser who has submitted news about his teams scientific research work at Soochow University in Suzhou, near Shanghai, China which makes use of RTL-SDR Blog V3 dongles in their research to replace bulky and expensive analysis equipment such as a lock-in amplifier, a vector network analyzer, or a spectrum analyzer. Their results show that an RTL-SDR can produce results as good as those more traditional pieces of equipment.
The researchers have also provided a summary video, which helps explain the science in an easier way. In a nutshell, as far as we understand it, they first use a laser optical interferometer to measure the graphene nanomechanical resonator, and then connect the output of the interferometer to the RTL-SDR, where the signal can be measured on a PC, and then easily put forward to further DSP processing in GNU Radio.
One interesting result is that they were able to recover very clear audio from the graphene nanomechanical resonator using the RTL-SDRs. This is highlighted in the video from around 4:25. Also provided via their website are two audio files demonstrating a clear reading of a Shakespeare sonnet, and a musical.
Our project is about detecting weak vibrations in nanomechanical resonators based on graphene drums. Graphene is an atomically thin membrane of carbon atoms. Graphene drums are made by suspending the membrane over an array of cavities nanofabricated in silicon oxide. Vibrations of the membrane are driven using a capacitive force at frequencies ranging from 10 to several hundreds of MHz. The detection of vibrations is done by optical interferometry, with the electrical output of our photodetector connected to a radio frequency measuring instrument. Usually, the measuring instrument is a lock-in amplifier, a vector network analyzer, or a spectrum analyzer, which are all rather bulky and expensive systems.
In our work, we demonstrate that graphene nanomechanical vibrations can be adequately measured with RTL-SDR v3 dongles. We find that the quality of our dongle-based measurements is as good as that of measurements made with a low noise spectrum analyzer, provided the driving force is not too small.
We take full advantage of your dongles by measuring the amplitude of two vibrational modes in parallel. For this, we split the output of the photodetector and connect it to two dongles. Measuring multiple modes in parallel is very valuable for nanomechanical sensing applications, as more information can be extracted compared to single mode measurements. However, this is a challenging task that requires several instruments collecting data in parallel. Here, we demonstrate that a composite of SDR dongles offers an alternative that is remarkably simple and inexpensive per frequency channel.
Finally, we show that our software-based instrument can be employed to demodulate human voice encoded in nanomechanical vibrations. For this, we drive vibrations with a frequency modulated force. As a baseband signal, we alternatively use a Chinese song performed by one of us, poetry by Shakespeare, and an excerpt from a musical.
We are now improving our measurement setup by synchronizing the clocks of several RTL-SDR v3 dongles to measure vibrational modes coherently. We are also greatly interested in employing your KrakenSDR for even better and cleaner multimode nanomechanical measurements.
A recent paper about our work can be freely accessed here:
Audio files for our demodulated nanomechanical signals can be found at the same address, but they are buried in a supplemental material (media) folder. Alternatively, the paper and the audio files can be found here:
Thank you to Sasha Engelmann for letting us know about the release of the Open-Weather community's web browser based NOAA APT decoder. The decoder allows for easy NOAA satellite decoding by allowing you to upload a wav file recording of a NOAA satellite pass, and it will decode it into an image within the browser.
The project emerged from a desire to understand the process of decoding APT audio recordings into NOAA satellite images, and a need for an accessible browser-based decoder for new practitioners during open-weather DIY Satellite Ground Station workshops.
While we were inspired by Thatcher's APT 3000, we felt accessibility, documentation and features could be expanded and improved. open-weather apt allows you to select an audio file on your computer, choose a demodulation method, add histogram equalisation and download images. The website does not store your personal data, including your location or any files you upload.
Over on the usradioguy.com blog, Carl Reinemann has highlighted a very impressive remote off-grid radio satellite image receiver setup by Manuel Lausmann (DO3MLA). The setup consists of two Raspberry Pi's, two RTL-SDRs and a QFH satellite antenna connected to an antenna splitter and bias tee. It is able to receive APT and LRPT images from NOAA and Meteor satellites which transmit at 137 MHz. The received images are then uploaded to the internet via a mobile LTE router.
The system is located a remote part of Northern Norway and is powered by a dual solar and wind turbine system with battery storage. Being so remote with little interference, the system is able to receive very clean images, and with the location being so Northern, it can even glimpse the north pole.
Manuel has uploaded a YouTube video where he shows each part of the system. It is in narrated in German, however the YouTube caption auto translate feature can be used.
He notes that in the future he hopes to install a web SDR like KiwiSDR on the site too.
The RX888 is a $200 software defined radio that has a 16-bit ADC and tuning range from 1 kHz up to 1.8 GHz, with a bandwidth of up to 64 MHz between 1 KHz to 64 MHz and 10 MHz between 64MHz - 1700MHz. The design is based on the RX-666 which is turn was based on Oscar Steila's (IK1XPV) BBRF103 original open source hobby design. The product is designed and manufactured in China and is sold on Aliexpress and eBay without any official company backing it.
While on paper, the RX888 has great specs and a great price, it appears that the software driver support from the manufacturer has been extremely poor, and no one has really been able to get this SDR working in practice without it constantly throwing errors and locking up.
@Aang245 & @Ryzerth are the developers of the popular open source SDR programs 'SatDump' and 'SDR++'. They often get queries to support the RX888, but have been unable to get much working due to broken drivers and no support from the manufacturer.
In the document Aang245, author of SatDump, discusses the technical problems he's been having with the library and drivers, noting that almost all of the library drive code is broken, leaving him unable to support the device in his software.
When actually attempting to use the library on any of my machines, pretty much nothing would work reliably, and even when streaming samples would work, gain control, frequency or simply loading the firmware would fail horribly.
Later, I tried instead using the ExtIO code, maintained by the original project maintainers. By then, libsddc mentioned above had been merged into that main repo. Seemed great… Until I tried to use it. To put it simply : It was bad before, but now it relied on an entire ExtIO, segfaulted seconds after trying to do anything, and of course what worked before didn’t even anymore.
A good reason for that is that when the library was “merged”, it instead was made to rely on ExtIO internals, with barely half of the functions even implemented or working...
...In summary, it just feels like the BBRF103 hobby project commercialized without any thoughts about consequences or the ecosystem, and not even usability. Same hardware, usually sold as a premium, but really just a bunch of parts hacked together.
Ryzerth, author of SDR++ then adds the following reinforcing viewpoint:
The code quality in the library was absolutely horrendous. Functions were unimplemented, stuff was hardcoded everywhere and it was just generally hacked together. Same goes for the firmware, it seems to be a barely modified “streaming” example from Cypress (the FX3 chip manufacturer)...
...I have tried multiple times to reach back to the manufacturer on twitter but they have been radio silent since April 2022...
...Something else that bothers me is that SDR seems to be popular in the SWL community. A bunch of people recommend it when the performance can only be described as mediocre. Making a wideband HF frontend is an art, and you’re not gonna get any good result from something built down to a price like it. It’s a cool ham radio project, but not something that can be marketed as a commercial SDR. I’ve seen people claim that it has superior performance to Airspy and SDRplay SDRs, which is complete bullsh*t...
...This SDR has been unlike any other SDR I’ve had to support. Other manufacturers have clean APIs, proper drivers and libraries. It usually takes me at most a day or two to support the hardware properly. Being an “aliexpress special”, I guess I shouldn’t be surprised, you get what you pay for. All the money went into the BOM and none into the R&D and software.
This entire saga highlights the fact that software defined radios are not only about the hardware specs. The support and state of the drivers from the manufacturer is key to allowing third party developers to integrate the device into their software.
The SunFounder TS7-Pro 7-Inch Touch Display is a portable high resolution 1024x600 7-inch touch screen with space on the back for a Raspberry Pi 4 to be mounted. It is also possible to mount an optional 2.5" SSD and 'PiPower' battery mount. The price of the TS7-Pro is currently reduced to $79.99 on Amazon and $89.99 in their direct store.
Last year in October we reviewed the 'RasPad 3.0' another SunFounder product that is a portable tablet enclosure for the Raspberry Pi 4. The RasPad is a more complete setup offering a full enclosure and built in battery. We reviewed the RasPad as we were curious to see how easy it would be to integrate a RTL-SDR on the inside. With some minor modifications we were able to successfully do this and create a portable RTL-SDR station. The RasPad 3.0 is a more costly device at US$259 on Amazon and $219 on their direct store.
This year SunFounder reached out to us again and asked if we wanted to test their TS7-Pro display, and see if it is possible to integrate an RTL-SDR.
Unboxing and General Assembly
SunFound TS7 Pro Boxed
The TS7-Pro comes packed well with foam. Inside is the manual, acrylic cover, 2x HDMI and 2x USB cables, 2x USB-USB bridge adapter (one for the Pi 4 and one for the Pi 3), 2x Micro-HDMI to HDMI bridge (one for the Pi 4 and one for the Pi 3), various M3 screws, a screwdriver and the LCD screen itself. The cables are designed for people who want to use the screen as a suppletory PC screen, so we did not end up using them.
SunFounder TS7 Pro Unboxed
The rear of the LCD screen contains all the LCD driver circuity as well as speaker and mounting points for the Raspberry Pi to connect it's GPIO header. The required HDMI and USB connections between the Raspberry Pi and LCD screen are handled by small bridge connectors.
SunFounder TS7 Pro LCD Rear PCB
The assembly process is very simple. Just mount the Raspberry Pi on the back, connect up the HDMI and USB bridge adapters, and screw on the acrylic backing plate.
There is also a very useful metal kickstand on the back which allows the screen to sit almost upright for easy viewing when placed on a surface.
RTL-SDR Modifications
The acrylic backing plate is designed to be able to mount a 2.5" SSD and/or a 'PiPower' battery module. Instead of using these accessories we decided to see if we could instead fit an RTL-SDR Blog V3 and our own USB battery pack on the back.
The acrylic plate has several screw and venting holes which we made use of to simply zip tie the RTL-SDR onto the back. We then used a short USB extension cable with a right angle connector between the RTL-SDR and Pi 4. There is plenty of space on the inside between the PCB and acrylic plate, so the RTL-SDR can be hidden away with the antenna port still easily accessible.
The USB battery pack is a bit larger, so fits on the outside of the enclosure also via zip ties.
Portable RTL-SDR with SunFounder TS7 ProShowing how much space is available between the PCB and acrylic plate.
After tightening down the zip ties, and hiding away the excess cabling, the whole construction is stable and not likely to fall apart easily.
Operating and Testing
Both the LCD screen and Pi 4 need to be powered separately. So you will need a battery pack that can support at least two outputs, and one that can support the required power draw of the Raspberry Pi whilst also powering the LCD screen.
We also initially connected a simple whip antenna to the RTL-SDR, but had to change that later as we will discuss.
RTL-SDR and Battery Pack Zip Tied to the TS7 Pro
For software we installed the Pi64 version of DragonOS, which is a ready to use Pi 4 image that has many RTL-SDR compatible programs built into it. A reminder that any software issues we discuss are unrelated to the SunFounder hardware.
The touchscreen works as expected, however we did notice that there is an initial bug on boot where the onscreen keyboard won't work unless you try to log in once with an empty password first. However, as we discovered in the RasPad review, most SDR programs like SDR++ are not very well suited to touch screens, so in the end we ended up connecting a wireless keyboard for ease of use.
Using a keyboard ended up also being a requirement in our tests, because the way we mounted the RTL-SDR meant that the screen was upside down. Using the screen in this 'upside down' orientation was preferred as the kickstand makes it sit a bit more upright and keeps the antenna more vertical. To get around the upside down screen we had to flip the screen in Ubuntu settings. Unfortunately flipping the screen does not also flip the touch screen inputs, so our touch inputs became inversed. There seem to be ways to fix this but we did not look further into the issue.
One other minor annoyance is that we found that the LCD screen would not get recognized by the Pi 4 when the keyboard's USB dongle was connected at boot. This may just be a Pi 4 issue, or an issue with our power pack unable to provide enough current at boot, as we have encountered similar issues in the past with Pi 4's used in other projects. Once the first text appears on the screen, connecting the keyboard USB dongle is possible.
With a keyboard connected, SDR++ opened and ran smoothly, and looks great on the 7 inch screen. We note that we did have to apply a small configuration fix in the Ubuntu sound settings in order to get the built in speakers to work. The fix is the same one used in the RasPad review, so please see that review for more information.
With it's somewhat open back, cooling doesn't seem to be an issue and we never noticed the Pi 4 throttling, or the RTL-SDR overheating.
RTL-SDR TS7-Pro with Wireless Keyboard
LCD Screen Interference
Again as we noted in the RasPad review, LCD screens are known to be big sources of RF interference and having the dongle and antenna this close to the screen electronics is not ideal. The image below shows what interference from the LCD screen looks like on the spectrum. Interference on the TS7 screen appears to be more pronounced when compared to the RasPad, possibly due to a different driver PCB with more exposed ribbon cables.
RF Interference from the TS-7 Pro LCD Screen
This interference is not present on all bands, and once an external antenna is used with a few meters of coax distance away from the LCD the problem reduces, but it doesn't go away fully. With an antenna disconnected there is almost no interference seen at full gain, so most of the interference appears to come through the coax cable and antenna. So we recommend using high quality shielded coax, as well as getting the antenna away from the LCD screen too.
Using a directly connected whip on a band with no LCD RFI
Conclusion
The SunFounder TS7 Pro is a nice and low cost product that allows you to easily connect a Raspberry Pi 4 to a touchscreen. Unlike the RasPad it does not come with a battery or enclosure, but this allows for a smaller form factor. The LCD screen itself is high quality, bright and with good viewing angles.
Hacking an RTL-SDR and battery pack onto the back of the SunFounder TS7 LCD display is easily possible and does result in a very nice portable form factor. However, there are still wires hanging out the sides which make it a little less neat to carry around and store away, although all the connections seem secure. Mounting the assembly into a 3D printed enclosure could help neaten things up.
LCD interference remains an issue, but by using an external antenna with a few meters of good quality shielded coax the problem can be managed.
Overall we think the product is an excellent starting point for any RTL-SDR Pi 4 project that requires a screen.
Disclaimer: We do not receive any compensation for this review apart from a free TS7 Pro.
SDRSharp (SDR#) is one of the most popular SDR programs that is used often with Airspy and RTL-SDR devices. Recently Youssef, the developer of Airspy products and the programmer behind SDR# has again been adding new enhancements to the software that allow AM DX listeners to easily receive channels that are even on top of each other in frequency.
The Co-Channel Canceller has been in SDR# since 2020, but recently enhanced for better performance and easier use, and a 'micro-tuner' feature has been added, allowing users to easily select the overlapping channel that needs to be cancelled.
Earlier in the year the noise canceller was also improved with a 'NINR' (Natural Intelligence Noise Reduction) algorithm that appears to be one of the best noise cancellers available in SDR software today.
Youssef's twitter @lambdaprog contains several videos demonstrating the effectiveness of the updates.
Playing around with a new feature of the Co-Channel Canceller. Still a lot of polishing, but it already shows some improvement over the old version. #airspy#sdrsharppic.twitter.com/CGfLHn9oZH
Over on YouTube the Society of Amateur Radio Astronomers have recently uploaded talks from their SARA 2022 online conference. Two of the talks we've seen focus on describing results produced by small and cheap WiFi Grid RTL-SDR radio telescopes.
Back in early 2020 we first published an article about how it is possible to use get into amateur radio astronomy cheaply using off the shelf WiFi grid dishes, combined with a 1420 MHz LNA + filter, an RTL-SDR and the SDR# software with IF average plugin to measure the galactic hydrogen line.
In the SARA conference we've seen two talks expanding on the use of WiFi grids for radio astronomy. In the first talk Alex Pettit discusses how he's used a WiFi grid attached to an equatorial telescope mount, and a custom modified feed in his setup. In his talk he explains how to use the IF average plugin, and how he uses a MATLAB script to process and plot the saved data.
Alex Pettit: Galactic Hydrogen 1.42 GHz RF Emission Radio Astronomy for $300
In the second talk Charles Osborne describes his "Scope-In-A-Box" which consists of the WiFi Grid, LNA, Filter and RTL-SDR combination and compare the setup versus the same hardware used on a larger 3.7m dish.
Charles Osborne: Comparing Scope-in-A-Box to a 3.7m Dish
If you were interested in those talks, you might also want to check out the other talks from the conference, many of which also involve the use of software defined radios in the receive chain for various amateur radio astronomy experiments.
