Tech Minds: A Beginners Guide to the Radioberry HF SDR Transceiver Pi Hat
Recently on the Tech Minds YouTube channel, Matt uploaded a video explaining how to set up and use the Radioberry HF SDR Transceiver Pi Hat. The Radioberry is an HF SDR transceiver based on the AD9866 chip. It has an operating frequency between 0 - 30 MHz, a 12-bit ADC, a maximum bandwidth of up to 384 kHz, and one RX and one TX channel. It is designed as a 'Pi hat' which means that it needs to be connected and sit on top of a Raspberry Pi single-board computer.
In his video Matt shows how to set up the Radioberry Raspberry Pi software. The process begins with installing the Raspbian OS, logging into SSH, and running the Radioberry installation script. He then shows how to connect to the Radioberry over a local network using SDR-Console V3. Later he shows how to install the pihpsdr software which gives the Radioberry a desktop control app that can be used with a LCD screen connected to the Raspberry Pi.
Matt goes on to show how he was also able to use the Radioberry TX function to make WSPR contacts across Europe from with his home location in the UK, despite its very low 150 mW output power.
